Define the operating basis
Resolve process, mechanical, utility, control and maintenance requirements for this stage.
TMCE · PROCESS-LED ENGINEERING
Blowers & SO2 Compressors
Process-gas machines selected around flow, pressure rise, corrosion, turndown and plant availability.
TMCE SYSTEMDesigned around the operating basis
MEDIUM / FEEDAir and SO2-bearing process gas
DELIVERABLEIntegrated blower / compressor package
APPLICATIONAcid plants and gas treatment
TMCE SCOPEDefinition through lifecycle support
APPLICATION CONTEXT
Start from the operating basis.
Process-gas machines selected around flow, pressure rise, corrosion, turndown and plant availability. TMCE treats the process duty, equipment, materials, utilities, controls and maintainability as one connected system.
Final capacity, performance, emissions, material and utility figures are project-specific. They are confirmed after the feed, site and operating envelope have been reviewed.
ENGINEERING SEQUENCE
Develop the system in connected stages.
Each stage is defined with upstream, downstream, utility, control and maintenance interfaces.
Select the process / equipment route
Resolve process, mechanical, utility, control and maintenance requirements for this stage.
Integrate system interfaces
Resolve process, mechanical, utility, control and maintenance requirements for this stage.
Commission and sustain operation
Resolve process, mechanical, utility, control and maintenance requirements for this stage.
DESIGN PRIORITIES
The decisions that shape a reliable system.
Plant system curve and surge margin
Confirm this requirement against normal, turndown, startup, shutdown and upset conditions.
Availability and spares strategy
Confirm this requirement against normal, turndown, startup, shutdown and upset conditions.
SO2 containment and shaft sealing
Confirm this requirement against normal, turndown, startup, shutdown and upset conditions.
Driver selection and energy use
Confirm this requirement against normal, turndown, startup, shutdown and upset conditions.
TYPICAL SCOPE
Equipment follows the process basis.
The final configuration is selected for the project, not copied from a catalogue.
Published catalogue values remain indicative until engineering confirmation.
Main gas blowers
SO2 compressors
Combustion-air blowers
Tail-gas fans
Motor / turbine drivers
Seal-air system
Lubrication system
Condition monitoring