Define the operating basis
Resolve process, mechanical, utility, control and maintenance requirements for this stage.
TMCE · PROCESS-LED ENGINEERING
Gaseous & Liquid SO2
Select the SO2 recovery route around feed concentration, product purity, utilities and downstream use.
TMCE SYSTEMDesigned around the operating basis
MEDIUM / FEEDSO2-rich process gas
DELIVERABLEGaseous or liquid SO2
APPLICATIONChemical production and industrial supply
TMCE SCOPEDefinition through lifecycle support
APPLICATION CONTEXT
Start from the operating basis.
Select the SO2 recovery route around feed concentration, product purity, utilities and downstream use. TMCE treats the process duty, equipment, materials, utilities, controls and maintainability as one connected system.
Final capacity, performance, emissions, material and utility figures are project-specific. They are confirmed after the feed, site and operating envelope have been reviewed.
ENGINEERING SEQUENCE
Develop the system in connected stages.
Each stage is defined with upstream, downstream, utility, control and maintenance interfaces.
Select the process / equipment route
Resolve process, mechanical, utility, control and maintenance requirements for this stage.
Integrate system interfaces
Resolve process, mechanical, utility, control and maintenance requirements for this stage.
Commission and sustain operation
Resolve process, mechanical, utility, control and maintenance requirements for this stage.
DESIGN PRIORITIES
The decisions that shape a reliable system.
Pressure-temperature phase behavior
Confirm this requirement against normal, turndown, startup, shutdown and upset conditions.
Moisture and product purity
Confirm this requirement against normal, turndown, startup, shutdown and upset conditions.
Uncondensed tail-gas integration
Confirm this requirement against normal, turndown, startup, shutdown and upset conditions.
Closed handling and emergency response
Confirm this requirement against normal, turndown, startup, shutdown and upset conditions.
TYPICAL SCOPE
Equipment follows the process basis.
The final configuration is selected for the project, not copied from a catalogue.
Published catalogue values remain indicative until engineering confirmation.
Gas cleaning
Compression
Drying
Refrigeration
SO2 condenser
Product storage
Loading / transfer
Tail-gas treatment